|
| MDE-5220H.pdf |
MDE-5220H FlexPay™ IV CRIND® Retrofit Kit Installation Instructions for Encore® S E-CIM™ · 11/22
This manual provides instructions to install a 5.7- or 10.4-inch Color Screen FlexPay™ IV CRIND® Secure Payment Outdoor Terminal [(SPOT M7)] Retrofit Kit in an Encore® S E-CIM™ pump/dispenser (with or without CRIND). The FlexPay IV CRIND provides a secure payment platform that is EMV®-certified and Payment Card Industry PIN Entry Device (PCI-PED)-certified. |
|
| MDE-5221J.pdf |
MDE-5221J FlexPay™ IV CRIND® Start-up Manual · 10/19
This manual provides start-up instructions for FlexPay™ IV CRIND®. |
|
| MDE-5226F.pdf |
MDE-5226F FlexPay™ IV CRIND® Retrofit Kit Installation Instructions for Encore® 500 S · 01/19
This manual provides instructions to install a 5.7-inch or 10.4-inch Color Screen FlexPay™ IV CRIND® (SPOT M7) Retrofit Kit in an Encore® 500 S pump/dispenser (with or without CRIND). |
|
| MDE-5359A.pdf |
MDE-5359A FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® 500 S
This manual provides instructions to install a 5.7-inch or 10.4-inch Color Screen FlexPay™ IV CRIND® Secure Payment Outdoor Terminal [(SPOT) M7] Retrofit Kit in an Encore® 500 S pump/dispenser (with or without CRIND). The entire Encore S door is replaced in this installation to accommodate the Enhanced Customer Interface Module (E-CIM™) module. |
|
| MDE-5360B.pdf |
MDE-5360B FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® S E-CIM™ · 02/2023
This manual provides instructions to install a 5.7- or 10.4-inch Color Screen FlexPay™ IV CRIND® (with Omnia) Retrofit Kit in an Encore® S E-CIM™ pump/dispenser (with or without CRIND). This manual also includes instructions for installing the Omnia board, which replaces the Dispenser
Communication Module [DCM2.X (including GSoM PCBs)] in the FlexPay IV units. |
|
| MDE-5362C.pdf |
MDE-5362C FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® 300/500 · 09/22
This manual provides instructions for installing a 5.7- or 10.4-inch Color Screen FlexPay™ IV CRIND® (with Omnia) Retrofit Kit in an Encore® 300/500 unit. This manual also includes instructions for installing the Omnia board, which replaces the Dispenser Communication Module (DCM)2.X (including GSoM PCBs) in the FlexPay IV units. |
|
| MDE-5405A.pdf |
MDE-5405A SPOT M7 Retrofit Kit (PBEPK-M7-VISTA) Installation Instructions for Wayne® Vista · 06/19
This manual provides instructions to install the Gilbarco® SPOT M7 Retrofit Kit on Wayne® Vista Wide and Narrow dispenser models 1, 2, and 3/VXXX. |
|
|
