|
MDE-4281M.pdf |
MDE-4281M Calibration Quick Reference Card Encore 300/500/500 S/700 S and Eclipse Units · 12/18
This card is intended for Authorized Service Contractors (ASCs) calibrating Encore 300/ 500/500 S/700 S and Eclipse dispensers. |
|
MDE-4334L.pdf |
MDE-4334L Atlas® Start-up/Service Manual · 10/23
This manual provides start-up and service information for Atlas® pumps and dispensers. It is a general service guide and not a replacement for Gasboy® Atlas certified training. |
|
MDE-5221J.pdf |
MDE-5221J FlexPay™ IV CRIND® Start-up Manual · 10/19
This manual provides start-up instructions for FlexPay™ IV CRIND®. |
|
MDE-5315C.pdf |
MDE-5315C Upgrading SSoM (DCM2.1 and DCM2.2) · 04/21
This manual provides instructions for upgrading a dispenser to Dispenser Communication Module [DCM2.1 (M14576A001) or DCM2.2 (M15737A001)] with remote management functionality provided by the Secure System on Module (SSoM) board. |
|
MDE-5318C.pdf |
MDE-5318C Auxiliary All Listen Kit (M15587K001) Installation Instructions · 03/20
This manual provides instructions to install the Auxiliary All Listen Kit (M15587K001) for Encore® S/700/900 Units.
Note: This installation requires two Authorized Service Contractors (ASC)s. |
|
MDE-5320H.pdf |
MDE-5320H Security Door Detection Kit (M15611K001, M15929K001, M15930K001, M15931K001, M15956K001, and M15956K002) Installation Instructions· 02/2024
This manual provides instructions to upgrade Encore® dispensers to have door entry detection system. The Security Door Detection Kits
(M15611K001, M15929K001, M15930K001, M15931K001, M15956K001, and M15956K002) are used to install required sensors and supporting components to monitor upper doors, printer doors, lower panels, and side sheathings. |
|
MDE-5326B.pdf |
MDE-5326B Passport® V11.02 Network Addendum for Concord Generic ®· 8/18
This manual provides network-specific information for Passport® V11.02 systems at stores running Concord network, also known as First Data Corporation (FDC), that are:
• Upgrading from Passport V8.02 with Service Pack W or later
• Upgrading from Passport V10 with Service Pack P or later
• Upgrading from Passport V11.01 with Service Pack C or later
• Installing V11.02 for the first time
|
|
MDE-5335A-PTBR.pdf |
MDE-5335A-PTBR Instruções Recomendadas de Instalação, Manutenção e Inspeção para Válvulas de Segurança para Mangueira (Breakaway) da GILBARCO VEEDER-ROOT
This document contains the Brazilian Portuguese language version of recommended procedures for installation, maintenance, and inspection for Gilbarco Veeder-Root hose safety valves (breakaway). |
|
MDE-5340A.pdf |
MDE-5340A Passport® V11.02 Network Addendum for NBS ®· 11/17
This manual provides network-specific information for Passport® V11.02 systems at stores that use the National Bankcard Services (NBS®) network:
• Upgrading from Passport V8.02 with Service Pack W or later
• Upgrading from Passport V10 with Service Pack P/Q or later
• Installing Passport V11.02 for the first time
|
|
MDE-5349A.pdf |
MDE-5349A Insite360™ Encore® Power Supply Retrofit Kit Installation Instructions · 03/17
This manual provides instructions to replace the M04104A001, M07555A001, M07555A002, or M07555A003 Power Supply Assembly with M07555A004 Encore® Power Supply Assembly. It also allows the removal of the auxiliary power supply to make the unit compatible with Insite360™ remote power cycle. |
|
MDE-5353.pdf |
MDE-5353 Encore® Lower Frame Repair Kit (M15838K001) Installation Instructions · 04/17
This manual provides instructions on installing the Lower Frame Repair Kit (M15838K001) on Encore® units manufactured in or after the year 2012, where an installing contractor has compromised the side center brace of the lower frame. |
|
MDE-5359A.pdf |
MDE-5359A FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® 500 S
This manual provides instructions to install a 5.7-inch or 10.4-inch Color Screen FlexPay™ IV CRIND® Secure Payment Outdoor Terminal [(SPOT) M7] Retrofit Kit in an Encore® 500 S pump/dispenser (with or without CRIND). The entire Encore S door is replaced in this installation to accommodate the Enhanced Customer Interface Module (E-CIM™) module. |
|
MDE-5360B.pdf |
MDE-5360B FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® S E-CIM™ · 02/2023
This manual provides instructions to install a 5.7- or 10.4-inch Color Screen FlexPay™ IV CRIND® (with Omnia) Retrofit Kit in an Encore® S E-CIM™ pump/dispenser (with or without CRIND). This manual also includes instructions for installing the Omnia board, which replaces the Dispenser
Communication Module [DCM2.X (including GSoM PCBs)] in the FlexPay IV units. |
|
MDE-5361A.pdf |
MDE-5361A FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for The Advantage® Series · 10/2020
This manual provides instructions to install a 5.7-inch Color Screen FlexPay™ IV CRIND® (with Omnia) Retrofit Kit into The Advantage® Series. |
|
MDE-5362C.pdf |
MDE-5362C FlexPay™ IV CRIND® (with Omnia) Retrofit Kit Installation Instructions for Encore® 300/500 · 09/22
This manual provides instructions for installing a 5.7- or 10.4-inch Color Screen FlexPay™ IV CRIND® (with Omnia) Retrofit Kit in an Encore® 300/500 unit. This manual also includes instructions for installing the Omnia board, which replaces the Dispenser Communication Module (DCM)2.X (including GSoM PCBs) in the FlexPay IV units. |
|
MDE-5367B.pdf |
MDE-5367B UX410 Contactless Card Reader Kit Installation Instructions for Encore® S E-CIM™, Encore 300/500 with FlexPay™ II CRIND® · 04/21
This manual provides instructions to install the UX410 Contactless Card Reader (CCR) Kit on dispensers with FlexPay™ II CRIND®. |
|
MDE-5369P.pdf |
MDE-5369P FlexPay™ IV (with Omnia V05.08) Programming and Service Manual • 02/2024
This manual provides instructions for the following:
•Set or modify the IP configuration for FlexPay™ IV CRIND®
•Configure Omnia board
•Set up the Applause™ Media System connectivity
•Register with Insite360™ Encore® Cloud for remote management |
|
MDE-5370A.pdf |
MDE-5370A FlexPay™ IV GSoM Kit (M14059K001) Installation Instructions · 11/17
This manual provides instructions on installing the FlexPay™ IV Gilbarco® Systems on Module (GSoM) Kit (M14059K001). |
|
MDE-5373A.pdf |
MDE-5373A Legacy® Totalizer Kit (M16330K001 and M16330K002) Installation Instructions · 08/18
This manual provides instructions to install the Totalizer and Cable Kit (M16330K001 and M16330K002) in Legacy® dispensers. |
|
MDE-5394C_ES-MX.pdf |
MDE-5394C-ESMX Tarjeta controladora VaporTEK™/VaporTEK-3 110 V UL® Sistema de recolección de recuperación de vapor para Encore® 500 S Manual de arranque y de servicio · 01/2023
Este manual ofrece información de arranque y de servicio para el Sistema de recuperación de vapor VaporTEK™. |
|
MDE-5394D.pdf |
MDE-5394D VaporTEK™/VaporTEK-3 Controller Board 110 V UL® Vapor Recovery Collection System for Encore® 500 S Start-Up and Service Manual · 09/24
This manual provides start-up and service information for the VaporTEK™ Vapor Recovery System. |
|
MDE-5402B.pdf |
MDE-5402B FlexPay™ IV Applause™ Media Kit with Omnia (M16183K001) Installation Instructions · 02/2023
This manual provides instructions on installing the FlexPay™ IV Applause™ Media Kit (M16183K001), which includes the Omnia assembly. |
|
MDE-5404Aa.pdf |
MDE-5404A Nano Nozzle Reader-T Service Manual· 08/18
This manual provides installation and maintenance instructions for the nano Nozzle Reader-T (nNR-T) that will be installed on Wiggins nozzles. |
|
MDE-5405A.pdf |
MDE-5405A SPOT M7 Retrofit Kit (PBEPK-M7-VISTA) Installation Instructions for Wayne® Vista · 06/19
This manual provides instructions to install the Gilbarco® SPOT M7 Retrofit Kit on Wayne® Vista Wide and Narrow dispenser models 1, 2, and 3/VXXX. |
|
MDE-5406C.pdf |
MDE-5406C VaporTEK™-3 (M16278K001) Kit Installation · 09/2024
This manual provides instructions for installing the VaporTEK™-3 (M16278K001) Kit on Encore® units. |
|
MDE-5412C.pdf |
MDE-5412C Passport® EDGE Installation and Start-up Manual· 02/19
This manual provides instructions for:
•The importance of “Why a site survey is needed prior to installing the Passport® Edge and Secure Zone Router (SZR)”
•How to properly install the Passport Edge Hardware with the SZR
•How to configure the Passport Edge to support communication between Passport Edge server and clients, PIN pads, dispensers, Impulse™, Applause™ Media System, Automated Tank Gauge (ATG), Tank Monitors, and other site LAN devices
|
|
MDE-5440B.pdf |
MDE-5440B Heater/Fan Kit (M14702K00X) Installation Guide for Encore® 900 Units· 11/2021
This manual provides instructions to install the Heater/Fan Kit (M14702K00X) for Encore® 900 units. |
|
MDE-5448A.pdf |
MDE-5448A Card Reader Cleaning Kit (M16086K00X) Instructions · 01/19
This manual provides instructions to use the M7 Card Reader Cleaner Kit (M16086K001) to remove the Foreign Object Debris (FOD) from a card reader. |
|
MDE-5459B.pdf |
MDE-5459B VaporTEK™-3 (M00989K25X) Kit Installation Instructions · 01/2023
This manual provides instructions for installing the VaporTEK™-3 (M00989K25X) Kit on Encore® units. |
|
MDE-5459B_ESMX.pdf |
MDE-5459B-ESMX Kits VaporTEK™-3 (M00989K00X) con instrucciones de instalación de la carcasa superior ensamblada · 02/23
Este manual brinda instrucciones para instalar el kit VaporTEK™-3 (M00989K25X) en las unidades Encore®. |
|
MDE-5491A.pdf |
MDE-5491A FlexPay™ IV Numeric Keypad to Alphanumeric Keypad Instructions · 02/20
This manual provides instructions
for upgrade of a dispenser door
from a numeric keypad to a secure
alphanumeric keypad for a FlexPay™
IV CRIND®. |
|
MDE-5492A.pdf |
MDE-5492A Encrypted Card Reader (ECR) Legacy (Non-EMV®) CRIND® Replacement Kit (M16711K002) Installation Instructions · 12/19
This manual provides instructions for replacing the Encrypted Card Reader (ECR) (M16711B001), Legacy (Non-EMV®) CRINDs. |
|
MDE-5493A.pdf |
MDE-5493A Encrypted Card Reader (ECR) Legacy (Non-EMV®) CRIND® Kit (M16711K003) Installation Instructions · 12/19
This manual provides instructions to install the Encrypted Card Reader (ECR) Legacy
(Non-EMV®) CRIND® Kit (M16711K003), also referred to as “ECR Kit.” |
|
MDE-5500A.pdf |
MDE-5500A Single-Phase Motor for Atlas® Replacement Kit (M17274K001) Instructions • 1/2020
The M13377B102 electric motor is a direct replacement for single-phase motors in 9100, 9800, 8700, and 8800 Atlas® K model units in the field. |
|
MDE-5568A.pdf |
MDE-5568A CFN PLUS and Fuel Truck Controller PLUS nOrCU Retrofit Kit (M09680B167) Installation Instructions • April 2021
This manual provides instructions for replacing the fuel controller, part of Gasboy® CFN PLUS and Fuel Truck Controller (FTC) systems. This procedure consists of removing the old controller (OrCU-N) and installing the new controller (nOrCU). |
|
MDE-5569A.pdf |
MDE-5569A USB Printer Maintenance Guide
6-Inch Roll Paper Ordering Information, preventing printer paper jams, and maintenance information. |
|
MDE-5586A.pdf |
MDE-5586A RJ-45 Kit with Omnia (M18405K001) Installation Instructions · 11/2021
This manual provides instructions on installing the RJ-45 Kit (M18405K001) with the Omnia assembly. |
|
MDE-5662B.pdf |
MDE-5662B Gear GPU+ Operation and Service Manual · 06/23
This manual provides operation and service information on the mechanical and hydraulic components for M09593A102 - Standard Version (75-90 LPM) Gilbarco® Gear Global Pumping Unit (GPU) model |
|
MDE-5672A.pdf |
MDE-5672A 10.4-inch SVGA Display for FlexPayTM IV Kit (M19045K001) Installation Instructions · February 2024
This manual provides instructions to upgrade FlexPay IV from Video Graphics Array (VGA) 10.4” to Super Video Graphics Array (SVGA) 10.4”. |
|
MDE-5691A.pdf |
MDE-5691A Nano Nozzle Reader Battery Replacement Instructions· 05/2024
This manual provides instructions for replacing the battery in the nano Nozzle Reader (nNR) using the new battery replacement kit. |
|
MDE-5812A.pdf |
MDE-5812A Encore® 500S Dispenser VaporTEK™- 3 Vapor Recovery Monitoring Installation Instructions · 09/24
This manual provides instructions for installing the VaporTEK™-3 Vapor recovery on the Encore® 500S dispensers. |
|
|